CS202-DMX-3-1
The CS202E-DMX-3-1 has a narrow gap closed vacuum shroud and radiation shield which can fit into narrow electromagnet pole spacings for high magnetic fields. The non-optical vacuum shroud is customizable to as low as Ø19mm and is available in nonmagnetic Aluminum. The radiation shield is made of either aluminum or nickel-free gold-plated OFHC copper.
The CS202E-DMX-3-1 is powered by our DE-202 series closed cycle cryocooler. This liquid helium-free cryostat uses a pneumatically driven Gifford-McMahon cycle to cool the sample.
Applications
Resistivity measurements
Hall probe experiments
DLTS
Thermal, electrical and magnetic susceptibility
Heat capacitance
Seebeck effect
Features
Typical Configuration
Options & Upgrades
Cryogen free
Low cost aluminum construction (also available in stainless steel)
Fully customizable to allow for extensions as well as larger sample spaces
2 helium hoses
Aluminum or stainless steel vacuum shroud for electrical experiments (DMX-3-1)
Aluminum radiation shield
Instrumentation for temperature measurement and control:
10 pin hermetic feedthrough
36 ohm thermofoil heater
Silicon diode sensor curve matched to (± 0.5 K) for control
Calibrated silicon diode sensor (±12 mK) with 4 in. free length for accurate sample measurement
Options for wiring:
Multipin feedthroughs with DC lines,
Low noise BNC feedthroughs with micro-coaxial cables,
High frequency (up to 18 GHz) RF cable assemblies,
Semi-rigid cables.
Sample holder including include LCC and DIP Chip Carriers, and wire-bonding chucks for electrical experiments
Temperature controller
4 K cold head (0.1 W @ 4.2 K)
5.5 K cold head (1 W @ 10 K)
Turbo upgrade for faster cooldown times
Custom temperature sensor configuration (please contact our sales staff)
Custom wiring configurations (please contact our sales staff)
Sample holder upgrades (custom sample holders available)